【linux系统下载_学习_教程_编程_软件】提供全系列Linux发行版下载学习-Linux部落
当前位置: 主页 > Linux系统下载 > FreeBSD >

FreeBSD 10.4 发布下载

官方网址:https://www.freebsd.org/ 推荐指数:★★★☆☆
软件介绍
FreeBSD 10.4 已正式发布,FreeBSD 10.4 主要更新如下:

    * Mellanox® ConnectX-4 series adapters are now supported by the newly added mlx5ib(4) driver.

    * OpenSSH received an update to version 7.3p1.

    * GNOME has been updated to version 3.18.

    * Xorg-Server has been updated to version 1.18.4.

    * 10.4-RELEASE is the first FreeBSD release to feature full support for eMMC storage, including eMMC partitions, TRIM and bus speed modes up to HS400. Please note, though, that availability of especially the DDR52, HS200 and HS400 modes requires support in the actual sdhci(4) front-end as well as by the hardware used. Also note, that the SDHCI controller part of Intel® Apollo Lake chipsets is affected by several severe silicon bugs. Apparently, it depends on the particular Apollo Lake platform whether the workarounds in place so far are sufficient to avoid timeouts on attaching sdhci(4) there.

    * Also in case a GPT disk label is used, the fsck_ffs(8) utility now is able to find alternate superblocks.

    * The aesni(4) driver now no longer shares a single FPU context across multiple sessions in multiple threads, addressing problems seen when employing aesni(4) for accelerating ipsec(4).

    * Support for the Kaby Lake generation of Intel® i219(4)/ i219(5) devices has been added to the em(4) driver.

    * The em(4) driver is now capable of enabling Wake On LAN (WOL) also for Intel® i217, i218 and i219 chips. Note that stale interface configurations from previous unsuccessful attempts to enable WOL for these devices now will actually take effect. For example, an `ifconfig em0 wol` activates all WOL variants including wol_mcast, which might be undesirable.

    * Support for WOL has been added to the igb(4) driver, which was not able to activate this feature on any device before. The same remark regarding stale WOL configurations as for the em(4) driver applies.

    * Userland coredumps can now trigger events such as generating a human readable crash report via devd(8). This feature is off by default.

    * The firmware shipping with the qlxgbe(4) driver has been updated to version 5.4.66. Additionally, this driver has received some TSO and locking fixes, performance optimizations as well as SYSCTLs providing MAC, RX and TX statistics.


本文地址:http://www.linuxzone.net/freebsd/288.html
下载地址
下载说明

1.本站所有系统镜像文件和软件均来自官方网站,可放心使用。
2.本站资源收集自互联网,仅供学习交流测试之用。
3.尊重原创,若有侵犯请与linuxzone@163.com联系,24小时内删除。

------分隔线----------------------------
栏目列表